AIRCUT-65 I Inverter Based Air Plasma Cutting Machine
Aircut- i Series Machine are Inverter Based Air Plasma Cutting Machines. They Are Widely Used for Cutting Ferrous as well as Non Ferrous Metals Using Inexpensive Air as the Cutting Media. These Machines are available in 65 Amps
Features :
- Advanced 'Soft Switching' Technology, Hence More Reliability.
- High Frequency Arc Striking with Pilol Arc.
- Stable Out Put Current.
- Cutting Current Will Slowly Increase to Increase the.
- Life of Electrodes Nozzle.
- Precise Preset & Display of Cutting Current.
- Air Test Switch to Set the Air Flow Precisely.
- High Power Factor & Efficiency.
- Good Cutting Quality.
- Continuous Adjustment of Current Possible.
Specifications :
| Model | AIRCUT-65 I |
|---|---|
| Cutting Thickness | CLEANCUTlNMS, SS - 12rnm ROUGMCUTMS, SS - 18mm |
| Input Power(KVA) | 9.5 |
| Current Range(A) | 25-65 |
| No Load Voltage (DC) | 380 |
| Weight (kg) | 26 |
| Duty Cycle | 60 % |
| Torch Cooling Type | Air |
| Input Supply | 380-440 V 3-Phase 50Hz Supply |
| Power factor | 0.9 |
| Dimensions LxWxH(mm) | 570 x 270 x 520 |
| Air pressure Required in | 5-6 kg/cm sq OR 0.4-0.6 MPa |
| Air Flow Required (CFM) | 5~6 OR > 180 L/Min |
Leave a Comment