AIRCUT-162 IW Inverter Based Air Plasma Cutting Machine
AIRCUT- 162 IW is inverter based air plasma cutting machine. It is widely used for cuting ferrous as well as non ferrous metals using inexpensive compressed air as the cutting media.
Features :
- Advanced 'Soft Switching' Technology, Hence More Reliability.
- High Frequency Arc Striking with Pilol Arc.
- Stable Out Put Current.
- Pressure gauge on the front panel to check air supply.
- Precise preset & display of cutting current.
- Air test switch to Set the Air Flow precisely.
- High power Factor & Efficiency.
- Stable output current.
- Good Cutting Quality.
- Continuous Adjustment of Current Possible.
- Built in water circulation system.
- Suitable for hand held & mechanised torch.
- Two levels of Air flow to ensure smooth pilot arc.
- Higher on load cutting & hence higher speed & cutting.
Specifications :
| Model | AIRCUT-162 IW |
|---|---|
| Cutting Thickness | Clean Cut in MS,SS-50 mm Rough Cut in MSSS-55mm Piercing Capacity-25mm Recommneded thickness on Plasma Tolly - 38 mm |
| Input Power(KVA) | 32.5 |
| Current Range(A) | 30 ~ 160 |
| No Load Voltage(DC) | 400 VDC |
| Weight (kg) | 100 |
| Duty Cycle | 100 % |
| Torch Cooling Type | Water |
| Gas Type | Air |
| Input Supply | 380-440 V 3-Phase 50Hz Supply |
| Power Factor | 0.85 |
| Efficiency | 85 % |
| Air Pressure Required in | 5-6 kg/cm sq. or 0.4 ~ 0.6 MPa |
| Air Flow Required | 5 ~ 6 CFM OR > 180 L/Min |
| Dimensions-(LxWxH mm) | 740 x 400 x 1050 |
Leave a Comment