AIRCUT-200-300 IW Inverter Based Air Plasma Cutting Machine
AIRCUT- 162 IW is inverter based air plasma cutting machine. It is widely used for cuting ferrous as well as non ferrous metals using inexpensive compressed air as the cutting media.
Features :
- Advanced 'Soft Switching' Technology, Hence More Reliability.
- High Frequency Arc Striking with Pilol Arc.
- Stable Out Put Current.
- Pressure gauge on the front panel to check air supply.
- Precise preset & display of cutting current.
- Air test switch to Set the Air Flow precisely.
- High power Factor & Efficiency.
- Stable output current.
- Good Cutting Quality.
- Continuous Adjustment of Current Possible.
- Built in water circulation system.
- Suitable for hand held & mechanised torch.
- Two levels of Air flow to ensure smooth pilot arc.
- Higher on load cutting & hence higher speed & cutting.
Specifications :
| Model | AIRCUT-200 IW | AIRCUT-300 IW |
|---|---|---|
| Cutting Thickness | Clean Cut in MS,SS-70mm Rough Cut in MS,SS-75mm Recommended Thickness on trolley=55mm |
Clean Cut : 100mm in MS,SS Rough cut: 105mm in MS,SS |
| Input Power(KVA) | 39 | 70 |
| Current Range(A) | 60 ~ 200 | 80 ~ 300 |
| No Load Voltage(DC) | 380 DC | 380 DC |
| Recommended Thickness on trolley | 80 mm | |
| Input Supply | 380 ~ 440 V 3-Phase 50Hz Supply | |
| Power Factor | 0.85 | |
| Efficiency | 85 % | |
| Duty Cycle | 100 % | |
| Air Pressure Required in KG/CM2 | 5 ~ 6 | |
| Type of Plasma Cutting Torch | Water Cooled | |
| Air Flow Required | 5 ~ 6 | |
Leave a Comment