Strip Cladding System
Strip cladding is a fusion welding process in which weld metal strip is fused on the surface. This process is normally used in pressure vessel manufacturing where corrosion resistant inner surface is required. We offer strip cladding system with inverter based welding power source along with strip cladding head. Power sources are available in 1000, 1600and 2000 Amps to suit different strip sizes.
Features :
- IGBT inverter based with latest Soft switching technology.
- Higher operating frequency and hence low volume and weight.
- Higher efficiency and power factor.
- CC/CV type and hence can be used for carbon arc gouzing.
- Microprocessor based system and hence precise control of parameter.
- Digital display for voltage and current.
- Can be used in ESSC and SAW process.
- Memory channels to store the data.
- Wire feed stops automatically if the wire/strip touches job while inching.
- Strip cladding head suitable for 30~60 mm wide strips.
- Water cooling provision provided for the head.
Specifications :
| Model | Autoweld 1001 I | Autoweld 1600 I | Autoweld 2000 I |
|---|---|---|---|
| Input Power(KVA) | 53 | 84 | 108 |
| Output Current Range | 100 ~ 1000 | 100 ~ 1600 | 100 ~ 2000 |
| Open Circuit Voltage V | 80 ~ 95 | ||
| Voltage adjusting Range | 20 ~ 44 | 25 ~ 44 | 25 ~ 44 |
| Power Factor | 0.94 | 0.03 | 0.93 |
| Duty Cycle | 100 % | ||
| Type of Cooling | Forced Air | ||
| Insulation class | H | ||
| Dimensjons of Power Source(DxWxHmm) | 795 x 410 x 835 | 1050 x 475 x 1250 | 1050 x 475 x 1250 |
| Weight(KG) | 125 | 186 | 212 |
| Suitable for strip size (mm) | < 30 | 30 ~ 60 | 30 ~ 60 |
Leave a Comment